BSOD codes for overclocking (from XS Forum)

- 0x101 = increase vcore
- 0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...
              H67/P67 increase/decrease Vcore first then qpi/vtt second.
              on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
              on i7 32nm SB, usually means too little vCore
- 0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
- 0x1E = increase vcore
- 0x3B = increase vcore
- 0x3D = increase vcore
- 0xD1 = QPI/VTT, increase/decrease as necessary can also be unstable Ram
             raise Ram voltage
- 0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
- 0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage
             or adjust QPI/VTT, or lower uncore if you're higher than 2x
- 0x109 = Not enough or too Much memory voltage
- 0x116 = Low IOH (NB) voltage, GPU issue (most common when running
             multi-GPU/overclocking GPU)
- 0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
 

이 글에 남겨진 댓글은 0개 입니다.

*

*